ESP-12F ESP8266 Wifi Wireless Module
- Product SKU: ROBOESP12F
- Category: Development Boards
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware,
ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
Specifications & Features of ESP-12F ESP8266 Wifi Wireless Module:-
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- Compatible with ESP-12（ESP-202）
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT commands
- Surface Mount Package with 2mm Pitch Pads
- Mulitple GPIO’s for all your sensor needs
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Both SMD and Inline package are available, and the pin pitch is 2.0mm.
* Product Images are shown for illustrative purposes only and may differ from actual product.
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
Each ESP8266 module comes pre-programmed with an AT command set firmware,
ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough onboard processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.
Specifications & Features of ESP-12F ESP8266 Wifi Wireless Module:-
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- Compatible with ESP-12（ESP-202）
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT commands
- Surface Mount Package with 2mm Pitch Pads
- Mulitple GPIO’s for all your sensor needs
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Both SMD and Inline package are available, and the pin pitch is 2.0mm.
* Product Images are shown for illustrative purposes only and may differ from actual product.
Shipping Policies
- To ensure that your order reaches you in the fastest time and in good condition, we only ship through reputed courier agencies.
- While we shall strive to ship all items in your order together, this may not always be possible due to product characteristics, or availability. However, we will inform you before doing it.
- If you believe that the product is not in good condition, or if the packaging is tampered with or damaged, before accepting delivery of the goods, please refuse to take delivery of the package, and call our Customer Care +919659361116 or Contact us, mentioning your order reference number. We shall make our best efforts to ensure that a replacement delivery is made to you at the earliest.
- You may track the shipping status of your order on our website, by clicking at Track your Order section.
- Please note all items (including gifts) will be shipped with an invoice mentioning the price, as per Indian Tax Regulations.
Shipping Partners
- We use FedEx, Aramex, Professional Services to ship our products to your destination as available during checkout and chosen by you.
- We also can ship through EMS Speed post on special request to remote locations, if you think that our shipping partners do not have coverage or served you improperly. HOWEVER, WE CAN’T GUARANTEE TO COMPLY TO YOUR REQUEST. This is due to the reason each shipment content is being verified by the post office before accepting. If they feel that the item may be damaged, then they will not accept the shipment.
Shipping Time / Delivery Time
- We make our best efforts to ship your order within the same day of the order. 99% of our orders are shipped within 24 Hours.
- We ship on weekdays (Monday to Saturday), excluding public holidays. Orders placed on SUNDAY will be shipped only on MONDAY
- Orders placed before 4.00 PM will be shipped on the same day except on Sundays and Public Holidays.
- Shipments through FedEx / Aramex/ Professional Services, if created before 04:00 PM will be picked up by them on the same day. Otherwise, the shipment will be picked up only on the next day.
- Though we can guarantee a delivery time of 2-5 days to anywhere in India, it is totally beyond our control. Each shipping companies have their own methods, intermediate transit locations, etc. and the delivery time is not predictable.
- Please plan your order allowing sufficient time for the delivery instead of last-minute orders.
Guarantee/Warranty
All items are delivered with a standard warranty of minimum 15 days (unless otherwise specified in the product page) to protect the customers from any manufacturing defect. If you have any problems with your order, please notify us within this duration from the date of shipment of any defective product. You agree to pay for the return shipping on exchanges and returns and we will reimburse this cost upon verification of a defect with the product. We will replace or repair the damaged products at free of cost with shipping prepaid by us. In case, we do not have the product in stock to provide a replacement, we will issue a 100% refund. Furthermore, no warranty will apply if the Product has been subject to misuse, static discharge, neglect, accident, modification, or has been soldered or altered in any way.
To the product need to be exchanged, firstly, please send the photos of damaged products to us. We will estimate the damages then decide the best way to exchange or return the product. If the particular item is not in stock to replace, we will provide the full refund.
100% Refund/Replacement
We guarantee to provide accurate descriptions and high-quality product as mentioned in the website. In order to protect customers from shipping damage, item mismatch or parts missing, etc., we are providing 2 days time (From the date of order delivery) to report the complaint by going to my account section and then to your order, you will find an option for Request Refund. Our technical team will verify the submitted details visually and will issue RMA number to return the material. Once we received the product our experts will verify the issue reported and will send the replacement items to the customer shipping cost prepaid by us. In case, we do not have the product in stock to provide a replacement, we will issue a 100% refund. Furthermore, no warranty will apply if the Product has been subject to misuse, static discharge, neglect, accident, modification, or has been soldered or altered in any way. Due to the nature of the products we are selling and our strict quality policy, we are unable to offer order cancellation and return without a valid reason. ROBODIUM reserves the right to take the final decision on all refund request.
Changing or Canceling An Order
Need change something about your order or just want it canceled? You can ask us (by Email Only ) to change the items on your order, update an address or payment method, or just cancel it. Customer Service will get back to you by email within one business day regarding your request. Only orders that are still in status “Pending” or “Payment Verification” can be altered or canceled. If your order has already moved to a different status, you won’t be able to alter it or cancel it. In some cases, Order cancellation may attract 5% bank charges depending on the payment methods used by the customer. (It is because most of payment gateway providers collect their Commission even though order canceled and refunded.).Due to the nature of the products we are selling and our strict quality policy, we are unable to offer order cancellation and return without a valid reason. ROBODIUM reserves the right to take the final decision on all refund request.
Return Guidelines
Once we confirmed the faulty item cannot be repairable by the customer or by Remote Desktop (Team Viewer), we will issue the RMA Number, which you have to mention clearly on Shipping boxes. Do not write anything on the merchandise packaging (Product package). Defective unused merchandise will be replaced within 2 days of receipt. All returns must include a copy of the original packing list that came with your shipment.
Limits Of Responsibility
We accept no responsibility for improper installation of our products. Electrical polarity must be properly observed in hooking up electrical components.
