Arduino Mega 2560 ATmega2650 Microcontroller CH340 Board
Rated 3.5/5 based on 11 customer reviews

Arduino Mega 2560 ATmega2650 Microcontroller CH340 Board

Available: Out of Stock

The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.

It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode.

The board has the following new features:

  • 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.

The Mega Arduino R3 Android Accessory Development Kit (ADK) can be power via the USB connection or with an external power supply. The power source is select automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack.

Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is power over USB, 500mA total is available for the phone and board.

 Specification:

Model Type

Arduino MEGA 2560

Microcontroller Chip

ATmega2560

Operating Voltage

5

Input Voltage(Recommended)

7V to 12V

Input Voltage (limit)

6V-20V

Analog I/O Pins

16

Digital I/O Pins

54 (of which 15 provide PWM output)

Clock Speed

16 MHz

Flash Memory

256 KB of which 8 KB used by bootloader

SRAM

8 KB

EEPROM

4 KB

DC Current for 3.3V Pin

50 mA

DC Current per I/O Pin

40 mA

Weight (gm)

34

Shipment Weight

0.12 kg

Shipment Dimensions

12 × 6 × 3 cm

 

* Product Images color  are shown for illustrative purposes only and may differ from actual product.

The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.

It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode.

The board has the following new features:

  • 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.

The Mega Arduino R3 Android Accessory Development Kit (ADK) can be power via the USB connection or with an external power supply. The power source is select automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack.

Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is power over USB, 500mA total is available for the phone and board.

 Specification:

Model Type

Arduino MEGA 2560

Microcontroller Chip

ATmega2560

Operating Voltage

5

Input Voltage(Recommended)

7V to 12V

Input Voltage (limit)

6V-20V

Analog I/O Pins

16

Digital I/O Pins

54 (of which 15 provide PWM output)

Clock Speed

16 MHz

Flash Memory

256 KB of which 8 KB used by bootloader

SRAM

8 KB

EEPROM

4 KB

DC Current for 3.3V Pin

50 mA

DC Current per I/O Pin

40 mA

Weight (gm)

34

Shipment Weight

0.12 kg

Shipment Dimensions

12 × 6 × 3 cm

 

* Product Images color  are shown for illustrative purposes only and may differ from actual product.

Shipping Policies

  • To ensure that your order reaches you in the fastest time and in good condition, we only ship through reputed courier agencies.
  • While we shall strive to ship all items in your order together, this may not always be possible due to product characteristics, or availability. However, we will inform you before doing it.
  • If you believe that the product is not in good condition, or if the packaging is tampered with or damaged, before accepting delivery of the goods, please refuse to take delivery of the package, and call our Customer Care +919659361116 or Contact us, mentioning your order reference number. We shall make our best efforts to ensure that a replacement delivery is made to you at the earliest.
  • You may track the shipping status of your order on our website, by clicking at Track your Order section.
  • Please note all items (including gifts) will be shipped with an invoice mentioning the price, as per Indian Tax Regulations.

Shipping Partners

  • We use FedEx, Aramex, Professional Services to ship our products to your destination as available during checkout and chosen by you.
  • We also can ship through EMS Speed post on special request to remote locations, if you think that our shipping partners do not have coverage or served you improperly. HOWEVER, WE CAN’T GUARANTEE TO COMPLY TO YOUR REQUEST. This is due to the reason each shipment content is being verified by the post office before accepting. If they feel that the item may be damaged, then they will not accept the shipment.

Shipping Time / Delivery Time

  • We make our best efforts to ship your order within the same day of the order. 99% of our orders are shipped within 24 Hours.
  • We ship on weekdays (Monday to Saturday), excluding public holidays. Orders placed on SUNDAY will be shipped only on MONDAY
  • Orders placed before 4.00 PM will be shipped on the same day except on Sundays and Public Holidays.
  • Shipments through FedEx / Aramex/ Professional Services, if created before 04:00 PM will be picked up by them on the same day. Otherwise, the shipment will be picked up only on the next day.
  • Though we can guarantee a delivery time of 2-5 days to anywhere in India, it is totally beyond our control. Each shipping companies have their own methods, intermediate transit locations, etc. and the delivery time is not predictable.
  • Please plan your order allowing sufficient time for the delivery instead of last-minute orders.

Guarantee/Warranty

All items are delivered with a standard warranty of minimum 15 days (unless otherwise specified in the product page) to protect the customers from any manufacturing defect. If you have any problems with your order, please notify us within this duration from the date of shipment of any defective product. You agree to pay for the return shipping on exchanges and returns and we will reimburse this cost upon verification of a defect with the product. We will replace or repair the damaged products at free of cost with shipping prepaid by us. In case, we do not have the product in stock to provide a replacement, we will issue a 100% refund. Furthermore, no warranty will apply if the Product has been subject to misuse, static discharge, neglect, accident, modification, or has been soldered or altered in any way.

To the product need to be exchanged, firstly, please send the photos of damaged products to us. We will estimate the damages then decide the best way to exchange or return the product. If the particular item is not in stock to replace, we will provide the full refund.

100% Refund/Replacement

We guarantee to provide accurate descriptions and high-quality product as mentioned in the website. In order to protect customers from shipping damage, item mismatch or parts missing, etc., we are providing 2 days time (From the date of order delivery) to report the complaint by going to my account section and then to your order, you will find an option for Request Refund. Our technical team will verify the submitted details visually and will issue RMA number to return the material. Once we received the product our experts will verify the issue reported and will send the replacement items to the customer shipping cost prepaid by us. In case, we do not have the product in stock to provide a replacement, we will issue a 100% refund. Furthermore, no warranty will apply if the Product has been subject to misuse, static discharge, neglect, accident, modification, or has been soldered or altered in any way. Due to the nature of the products we are selling and our strict quality policy, we are unable to offer order cancellation and return without a valid reason. ROBODIUM reserves the right to take the final decision on all refund request.

Changing or Canceling An Order

Need change something about your order or just want it canceled? You can ask us (by Email Only ) to change the items on your order, update an address or payment method, or just cancel it. Customer Service will get back to you by email within one business day regarding your request. Only orders that are still in status “Pending” or “Payment Verification” can be altered or canceled. If your order has already moved to a different status, you won’t be able to alter it or cancel it. In some cases, Order cancellation may attract 5% bank charges depending on the payment methods used by the customer. (It is because most of payment gateway providers collect their Commission even though order canceled and refunded.).Due to the nature of the products we are selling and our strict quality policy, we are unable to offer order cancellation and return without a valid reason. ROBODIUM reserves the right to take the final decision on all refund request.

Return Guidelines

Once we confirmed the faulty item cannot be repairable by the customer or by Remote Desktop (Team Viewer), we will issue the RMA Number, which you have to mention clearly on Shipping boxes. Do not write anything on the merchandise packaging (Product package). Defective unused merchandise will be replaced within 2 days of receipt. All returns must include a copy of the original packing list that came with your shipment.

Limits Of Responsibility

We accept no responsibility for improper installation of our products. Electrical polarity must be properly observed in hooking up electrical components.